Basic cleaner without rinsing.
Area of ​​application:
For cleaning hard floors and all waterproof floors such as PVC, linoleum, rubber and other plastics
Hints:
Not suitable for wood and unsealed parquet.
Drying processes can be prevented by the respective processing of sections.
Product features:
Moderately alkaline, universal basic cleaner.
Dissolves wax, polymer and self-shine layers quickly and powerfully.
Reliable even on heavily overgrown floors.
Gentle on materials thanks to the low pH value.
Short exposure time.
Good network properties.
Anti-foam.
Basic cleaning without rinsing.
Application/Dosage:
Removal of polymer layers:
Apply diluted 2:10 with water.
Removal of local film residues: Dilute 1:10 with cold water:
Top stripping:
50 ml cleaner in 1 liter ready-to-use solution.
Final cleaning:
300 ml in 10 liters ready-to-use solution.
Application: Spread the solution on the floor.
Leave on for about 10 minutes.
Then thoroughly clean with a single-disc machine (green pad or scrubbing brush).
Vacuum off the dirt.
Wipe down with a damp cloth.
No rinsing necessary.
For particularly stubborn dirt, increase the concentration to 30-40%.
Important instructions:
This product is intended for professional use.
Please refer to the safety data sheet and product label for further information.
Storage:
Only store product original packed and sealed.
Store at room temperature.
Protect from frost.
Disposal:
Feed empty containers to the dual system.
Declaration of ingredients (EG) No. 648/2004:
Less than 5% amphoteric surfactants, nonionic surfactants, fragrances, PHENOXYETHANOL.
Sales Units:
10 liter canister.
60 canisters per pallet.
Classification according to (EG) No. 1272/2008 CLP:
Hazard class: Eye irritation.
Danger category: 2
Hazard statement: H319-Causes serious eye irritation.
Danger sign - Attention: