FLOOR CLEANER- Basic cleaner, highly alkaline
Fields of application
Alkali-resistant and water-resistant hard floor covering such as PVC, stone (unpolished), brick slabs and earthenware slabs
Product advantages/properties
Very good film-removing action
Dissolves stubborn dirt
For application in cleaning machines
Foam-inhibited
Highly alkaline
Very good wetting properties
With pleasant fragrance
Application and dosage
1 - 2,5 l : 10 l water Spread solution evenly over the floor and allow approx. 10 min. contact time. Do not allow to dry. Then carry out basic cleaning with a single-disk machine or scrubbing dryer fitted with an appropriate pad. Remove dirt solution with a wet vacuum cleaner. Then rinse the floor thoroughly with plenty of clean water.
Note
Always use cold water.
Check covering for colour fastness before application.
Not suitable for floors susceptible to alkalis, such as linoleum, rubber, open pore wood, cork and calciferous stone (e.g. marble and terrazzo).
When being used in the automat, the tanks should be regularly cleaned and rinsed.
Changes or variations in colour of the product do not impact on the quality.
Hazard statements
H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
GISBAU code: GG 80
Article number: G424-0010