Protects metal, iron, steel and sheet metal against oxidation and corrosion
APPLICATION:
Anti-rust coating with zinc and aluminum content in solvent medium with a mat finish.
Protects metal, iron, steel and sheet metal against oxidation and corrosion.
For application on rails, guardrails, welding beads, galvanized metal parts, metal constructions, nuts and bolts, taps, welded joints.
For indoor and outdoor protection: iron, steel, galvanized sheet metal such as frames, structures, roofing, signage, etc.
Cold galvanizing - 80°C to + 250°C
Can be used as primer.
RECOMMENDED FOR:
Manufacturing plants.
Maritime sites.
Schools.
Commercial buildings.
Food-processing plants.
All sites using or built with exposed steel and iron.
INSTRUCTIONS FOR USE:
Shake well until you clearly hear the ball bearing.
Continue for 1 minute
Brush, descale and degrease the area to be treated, then spray from 10 to 15 cm.
Touch-dry: several minutes
Hardens: 12 hours
PACKAGING:
Packaging unit: Aerosol 500ml
Pack size: Box of 12 units
Tin can Diameter: 65mm/Height: 195 mm.
Nominal volume: 650 ml /Net volume 500 ml.
Pallet size: 1080 units – 90 boxe
PRECAUTIONS FOR USE:
After each use, purge the aerosol can upside down until the gas is evacuated.
Before each use, the temperature of the aerosol can must be below 15°C.
REGULATIONS:
WARNING - FOR PROFESSIONAL USE ONLY.
Dangerous. Follow precautions for use.
Refer to the safety data sheet (SDS). Available on request.