Sanitary maintenance cleaner.
Area of ​​application:
For daily cleaning of all water and acid-resistant surfaces and materials in the entire sanitary area.
Suitable for the hygienic cleaning of sanitary porcelain, chrome and stainless steel surfaces, colorfast plastic and acid-resistant wall and floor tiles.
Not suitable for acid-sensitive materials.
Product features:
Based on amidosulfonic acid.
With particularly good lime and urine stone dissolving power.
Effortlessly removes dirt such as limescale, rust, soap residue, greasy dirt, etc. without leaving streaks.
With excellent drainage effect.
With a pleasant fresh scent.
Application/Dosage:
For basic cleaning:
Dose depending on the degree of soiling.
Use undiluted for stubborn dirt.
For maintenance cleaning:
Use diluted 20 - 50 ml in 10 liters of water.
Apply undiluted to toilets, fittings, sinks and rinse with clear, cold water after a short exposure time.
Important instructions:
This product is intended for professional use.
Please refer to the safety data sheet and product label for further information.
Storage:
Do not store together with alkalis.
Do not use acid-sensitive materials.
Store in a well-ventilated place.
Protect from frost.
Disposal:
Feed empty containers to the dual system.
Ingredients (EG) No. 648/2004:
Less than 5% nonionic surfactants, fragrances, BUTYLPHENYL METHYLPROPIONAL, LIMONENE.
Sales Units:
1 liter bottle - ( 12 bottles/ box) - ( 40 boxes = 480 bottles/ pallet).
10 liter canister (60 canisters/pallet).
Classification according to (EG) No. 1272/2008 CLP:
Hazard class: Eye irritation.
Danger category: 2.
Hazard statement: H319-Causes serious eye irritation.
Danger sign: Warning

H319-Causes serious eye irritation.
Wear P280 protective gloves and eye/face protection.
P305+P351+P338-IF IN EYES:
Rinse cautiously with water for several minutes.
If possible, remove contact lenses.
Continue rinsing.
P337+P313-If eye irritation persists:
Get medical advice/attention.