GRAFFITINE CLEANER C3- FOR POROUS SURFACE
APPLICATION:
Anti-graffiti product for porous surfaces. 
Ideal for cleaning in hard-to-reach areas.
The anti-graffiti product is a blend of high-performance solvents for quickly stripping surfaces covered in graffiti.
Use: 
Removes graffiti from porous surfaces: sandstone, marble, brick floors and walls etc.
Coverage: 
Each can covers a surface of approximately 8m², depending on the conditions of the surface and the method of application.
RECOMMENDED FOR:
Local authorities,
Municipal services
Industrial sites
Cleaning companies for indoors and outdoors: 
Smooth walls, phone booths, roller shutters, elevators, concourses (stations, underground rail, malls, etc.), railway wagons, road signs, etc.
INSTRUCTIONS FOR USE:
Shake well before use.
Spray from 15cm in an even layer over the surface.
Hold the can upright.
Graffiti on porous surfaces: 
Leave to take effect for 10 to 15 minutes. 
Brush vigorously. 
Repeat if necessary and scrub until graffiti disappears. 
Rinse abundantly with tepid or hot water. 
Do not apply on rubber without testing first.
Stripping paint: 
Leave to take effect for 10 minutes. 
Paint is softened significantly but there is no visible swelling or blistering. 
When the product has set into a film, remove with a paint spatula. Repeat if the layer is thick. 
Rinse abundantly.
PACKAGING:
Presentation: Aerosol can
Pack size: Carton of 6
Tin can Diameter: 65 mm Height: 195 mm
Nominal volume: 650 ml - Net volume: 500ml
Pallet size: 1,080 units – 90 cartons
REGULATIONS:
WARNING - FOR PROFESSIONAL USE ONLY.
Dangerous. Follow precautions for use.
Refer to the safety data sheet (SDS). Available on request.